Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

WS-SVC-FWM-1-K9 Upgrading or Downgrading the Firmware

Hello,

I've got a used WS-SVC-FWM-1-K9 on the way and I'd like to standardize it to the Firewall Module Software Version 4.0. I'm not positive if the current software on it is newer or older than Version 4.0. Is this possible to perform or is the Software as is on these modules? Any help would be greatly appreciated, thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Red

WS-SVC-FWM-1-K9 Upgrading or Downgrading the Firmware

Nope you can upgarde or downgrade the FWSM just as you do on ASA or PIX, to check the software running on it, do:

show module

on your switch, it will get you the IOS.

Follow these docs for upgrade procedures:

http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/swcnfg_f.html

Hope that helps.

Thanks,

Varun

Thanks, Varun Rao Security Team, Cisco TAC
2 REPLIES
Red

WS-SVC-FWM-1-K9 Upgrading or Downgrading the Firmware

Nope you can upgarde or downgrade the FWSM just as you do on ASA or PIX, to check the software running on it, do:

show module

on your switch, it will get you the IOS.

Follow these docs for upgrade procedures:

http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/swcnfg_f.html

Hope that helps.

Thanks,

Varun

Thanks, Varun Rao Security Team, Cisco TAC
Community Member

WS-SVC-FWM-1-K9 Upgrading or Downgrading the Firmware

Varun,

Perfect, thanks for you help!

2246
Views
0
Helpful
2
Replies
CreatePlease to create content