I am contemplating deploying two ISR routers as zone based firewalls. They would have possibly up to four zones on them. I have both 2811s and 3845s and would prefer to use the 2811s as the 3845s have already been ear marked. Does anyone know what type of load this could put on a 2811? One interface and zone would be for an internet facing connection, one interface and zone for a user segment of about 150 people, the other two interfaces and zones would be to segregate specific server segments with no more then 15-20 hosts per segment. Thanks in advance.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...