Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Beispiel German Voice Dial-Peers

Huhu,

ich hoffe hier hat jemand ein Rat/Beispiel.

Wie kann ich bei einem Call Manager Express am besten den German Numbering Plan abdecken? Ich möchte nicht immer den Interdigit Timeout abwarten oder die # drücken.

Hat da jemand eine Idee für die verschiedenen Dial Peers? Bin noch relativ neu in dieser Sache.

Bin für jeden Tip dankbar.

Schöne Grüsse

Jason

1 REPLY

Beispiel German Voice Dial-Peers

I read that in Germany there is a variable length number plans, so phone numbers generally have a variable length. The most flexible way to handle variable length is create a dial-peer with a "T" timer character in the destination pattern. The default interdigit value is 10 seconds. You can configure the interdigit timeout by using the "timeouts inter-digit" command in voice-port configuration mode.

If you don't want wait you must configure specific dial-peer for every called number.

An other way is send the called number in overlap mode. Try to read the "Overlap Dialing Support for SIP and SCCP IP Phones " paragraph at this link

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesystm.html#wp1065949

Regards.

1687
Views
0
Helpful
1
Replies
CreatePlease login to create content