Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1841 SEC K9 with HWIC-2FE

Hi!

Is it possible to use the HWIC-2FE module into the 1841 SEC/K9 bundle? Using the online Cisco Dynamic config tool, HWIC-2FE is not listed as an option when you select the 1841. Does it mean that this configuration won't work? Thanks very much for your help!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: 1841 SEC K9 with HWIC-2FE

Unfortunately the 1841 does not support the HWIC-2FE module. It only supports the HWIC-1FE module. See attached link for more details -

http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/fe_hwic.html#wp1049748

Jon

2 REPLIES
Hall of Fame Super Blue

Re: 1841 SEC K9 with HWIC-2FE

Unfortunately the 1841 does not support the HWIC-2FE module. It only supports the HWIC-1FE module. See attached link for more details -

http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/fe_hwic.html#wp1049748

Jon

New Member

Re: 1841 SEC K9 with HWIC-2FE

Hi Jon!

Thanks very much for the useful link, you answered my inquiry authoritatively. On the side though, I have another question regarding the HWIC-1FE. Using the config tool, after choosing the 1841 SEC K9, it won't allow me to choose the HWIC-1FE unless I change the IOS to one that doesn't have crypto, why is that? Who would want to use an IOS without crypto? Thanks very much again for your help.

692
Views
0
Helpful
2
Replies