05-04-2007 03:19 AM - edited 03-05-2019 03:52 PM
Hi
I recently started working at a company in CapeTown South Africa, where they have 5 Cisco 2900XL Series switches.
The previouse network administrator left with some sour grape, thus not giving me any info about the switches.
I managed to download Cisco Network Assistant, so that i can discover what the IP address for the switches are so i can manage them, as some of the port seems to be configured to half duplex etc.
However it seems all these switches has passwords on them. How can i access them, or reset the password, without having to completly reset the switches information?
Thanks in advance
Robert
Solved! Go to Solution.
05-04-2007 03:31 AM
Hi,
Here you go follow this doc:
NOTE: Don't forget to release the Mode button when the LED above Port1x goes out.
HTH, please rate if it does help,
Mohammed Mahmoud.
05-04-2007 03:23 AM
Hi,
You can reset the password on these device, i you Follow the step by step procedure as outlined in this document.
Hope this helps.
-VJ
05-04-2007 03:31 AM
Hi,
Here you go follow this doc:
NOTE: Don't forget to release the Mode button when the LED above Port1x goes out.
HTH, please rate if it does help,
Mohammed Mahmoud.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide