01-25-2010 07:40 PM - edited 03-06-2019 09:26 AM
I am bit new to cisco and i am learning CCNA.
i have 3 routers with a switch and pc connected to the switch.
i am working on RIP and i enabled it on all routers and i am able to ping all interfaces/devices (2950 switch, 2500 & 2600 routers)
my current connection looks like this
PC---Switch(2950)---Router2(2610)---Router1(2500)---Router3(2610)--- Cable/Dsl Router(D-Link)--Cable modem
i can ping from PC to Router3's both interfaces but soon as i try to ping the Cable/Dsl Router or any external ip i get request timed out.
on my router3 f/e0 is connected to the Cable/DSL switch port.
The thing is from router3 i can ping external ip and the cable/dsl router. (i think i am missing out on something !!!)
Router3 running-config
!
version 12.4
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname C2610XM_R3
!
boot-start-marker
boot-end-marker
!
enable secret 5 $
!
no aaa new-model
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
!
!
!
!
ip domain lookup source-interface FastEthernet0/0
ip domain name lab.local
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address 172.17.64.2 255.255.240.0
duplex auto
speed auto
!
interface Serial0/0
ip address 172.17.32.2 255.255.240.0
!
interface BRI0/0
no ip address
encapsulation hdlc
shutdown
!
router rip
version 2
network 172.17.0.0
!
no ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 172.17.64.1
!
no ip http server
no ip http secure-server
!
!
control-plane
!
banner login -- X.X.32.0 / X.X.64.0 --
alias exec con conf t
alias exec sib show ip int brief
alias exec srb show run | b
alias exec sri show run int
!
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
password 7
login
!
!
end
Solved! Go to Solution.
01-25-2010 10:05 PM
Hi,
For communicating to external world natting needs to be done at router 3 and as you have told that from router 3 you are able to ping external ips,check out the reverse route for internal subnet in dsl modem.
and check out the link on natting also.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
Hope to help !!
Ganesh.H
01-25-2010 10:05 PM
Hi,
For communicating to external world natting needs to be done at router 3 and as you have told that from router 3 you are able to ping external ips,check out the reverse route for internal subnet in dsl modem.
and check out the link on natting also.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
Hope to help !!
Ganesh.H
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: