Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3 routers lab 1 connect to DSL router.

I am bit new to cisco and i am learning CCNA.

i have 3 routers with a switch and pc connected to the switch.

i am working on RIP and i enabled it on all routers and i am able to ping all interfaces/devices (2950 switch, 2500 & 2600 routers)

my current connection looks like this

         

PC---Switch(2950)---Router2(2610)---Router1(2500)---Router3(2610)--- Cable/Dsl Router(D-Link)--Cable modem

                       

i can ping from PC to Router3's both interfaces but soon as i try to ping the Cable/Dsl Router or any external ip i get request timed out.

on my router3 f/e0 is connected to the Cable/DSL switch port.

The thing is from router3 i can ping external ip and the cable/dsl router. (i think i am missing out on something !!!)

Router3 running-config

!

version 12.4

service timestamps debug uptime

service timestamps log uptime

service password-encryption

!

hostname C2610XM_R3

!

boot-start-marker

boot-end-marker

!

enable secret 5 $

!

no aaa new-model

no network-clock-participate slot 1

no network-clock-participate wic 0

ip cef

!

!

!

!

ip domain lookup source-interface FastEthernet0/0

ip domain name lab.local

!

!

!

!

!

!

!

interface FastEthernet0/0

ip address 172.17.64.2 255.255.240.0

duplex auto

speed auto

!

interface Serial0/0

ip address 172.17.32.2 255.255.240.0

!

interface BRI0/0

no ip address

encapsulation hdlc

shutdown

!

router rip

version 2

network 172.17.0.0

!

no ip forward-protocol nd

ip route 0.0.0.0 0.0.0.0 172.17.64.1

!

no ip http server

no ip http secure-server

!

!

control-plane

!

banner login   -- X.X.32.0 / X.X.64.0 -- 

alias exec con conf t

alias exec sib show ip int brief

alias exec srb show run | b

alias exec sri show run int

!

line con 0

exec-timeout 0 0

logging synchronous

line aux 0

line vty 0 4

password 7

login

!

!

end

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: 3 routers lab 1 connect to DSL router.

Hi,

For communicating to external world natting needs to be done at router 3 and as you have told that from router 3 you are able to ping external ips,check out the reverse route for internal subnet in dsl modem.

and check out the link on natting also.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml

Hope to help !!

Ganesh.H

1 REPLY

Re: 3 routers lab 1 connect to DSL router.

Hi,

For communicating to external world natting needs to be done at router 3 and as you have told that from router 3 you are able to ping external ips,check out the reverse route for internal subnet in dsl modem.

and check out the link on natting also.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml

Hope to help !!

Ganesh.H

2897
Views
0
Helpful
1
Replies