03-20-2007 07:10 PM - edited 03-05-2019 03:01 PM
does the ip-base image do inter-vlan routing, or do i need the ip-services image?
03-20-2007 10:47 PM
Hi Matt,
I checked on Cisco Feature Navigator tool and found that IEEE 802.1Q VLAN Trunking feature is supported with IP BASE in your 3750 switch.
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Here is a good document about inter-vlan routing:
http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008015f17a.shtml
Hope it helps!
Regards,
Juan
03-21-2007 06:31 AM
IP base supports static routing, RIPv1 and RIPv2. Any other routing protocol requires IP Services.
HTH and please rate.
03-21-2007 09:54 AM
Hi
Sure they will do.
Just make sure to give "ip routing" and ip address to all vlans.
Regards
JD
03-22-2007 03:39 PM
IP-base support RIP og static routing.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: