Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

6506 switch system LED amber

I am just checking a brandnew 6506 swich and it is indicating system LED in amber colour when it running.

Please consider folowing things also,

1. I'm running the system in single power connectivity.

2. The switch is not fixed in the rack and not grounded yet.

If someone can advice me whether this is a system problem or something because of above reason or else, it would be a grate help for me.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: 6506 switch system LED amber

Hi Samanthat K

I noticed this too on a 6509 - the system light will turn green when the 2nd PSU is fitted and on......

Please rate if helps...

Fraser

2 REPLIES
New Member

Re: 6506 switch system LED amber

Hi Samanthat K

I noticed this too on a 6509 - the system light will turn green when the 2nd PSU is fitted and on......

Please rate if helps...

Fraser

Re: 6506 switch system LED amber

This is just an environmental alarm on the supervisor that is letting you know that you are only using one power supply. Since you are using one power supply you can ignore the LED status. Typically you would want to use two power supplies in the chassis.

Mark

637
Views
0
Helpful
2
Replies
CreatePlease to create content