Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

6509 Load Balancing

Hello guys,

How can I implement load balancing and redundancy at my two 6509 Switch?

Thanks in advance.

Cheers!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 6509 Load Balancing

The easiest way would be to implement VSS. It may require a Sup and/or chassis upgrade.

http://www.cisco.com/en/US/products/ps9336/index.html

Another way is to implement first hop gateway redundancy using HSRP or GLBP.

http://www.cisco.com/en/US/tech/tk648/tk362/tk321/tsd_technology_support_sub-protocol_home.html

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a00807d2520.shtml

Hope that helps.

2 REPLIES

Re: 6509 Load Balancing

The easiest way would be to implement VSS. It may require a Sup and/or chassis upgrade.

http://www.cisco.com/en/US/products/ps9336/index.html

Another way is to implement first hop gateway redundancy using HSRP or GLBP.

http://www.cisco.com/en/US/tech/tk648/tk362/tk321/tsd_technology_support_sub-protocol_home.html

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a00807d2520.shtml

Hope that helps.

New Member

Re: 6509 Load Balancing

Thanks. Yes, it helps a lot.

Cheers!

454
Views
0
Helpful
2
Replies
CreatePlease to create content