Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACL's on Subinterfaces

I have frame a relay circuit. Where should I bind the ACL's? Is it on subinterface or Physical interface?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: ACL's on Subinterfaces

Avil

Where to bind the ACL depends somewhat on how you have configured the router. But the simple answer is that you should bind the ACL where you have assigned the IP address and where IP processing is taking place. So if you have configured the IP address on the physical interface (making it a multipoint connection) you bind the ACL on the physical interface. And if the physical interface has no IP address and the IP address in on the subinterface then you bind the ACL on the subinterface.

HTH

Rick

3 REPLIES
Hall of Fame Super Silver

Re: ACL's on Subinterfaces

Avil

Where to bind the ACL depends somewhat on how you have configured the router. But the simple answer is that you should bind the ACL where you have assigned the IP address and where IP processing is taking place. So if you have configured the IP address on the physical interface (making it a multipoint connection) you bind the ACL on the physical interface. And if the physical interface has no IP address and the IP address in on the subinterface then you bind the ACL on the subinterface.

HTH

Rick

Hall of Fame Super Silver

Re: ACL's on Subinterfaces

Avil

I am glad that my answer was helpful. Thank you for using the rating system to indicate that your question was resolved. It makes the forum more useful when people can read a question and can know that they will read a response which successfully resolved the question.

The forum is an excellent place to learn about Cisco networking. I encourage you to continue your participation in the forum.

HTH

Rick

New Member

Re: ACL's on Subinterfaces

Well, I tried a search for this particular topic on google but couldn't find the answer. I always use this forum for a quick results.

678
Views
0
Helpful
3
Replies
CreatePlease login to create content