06-11-2007 12:33 PM - edited 03-05-2019 04:38 PM
Hi,
I'm trying to get my acs server to log all the commands that are used during the users session on a network device. I have everything up and running but it won't log the commands at all. Here is my config for AAA from my 2950 switch.
aaa new-model
aaa authentication login default tacacs+ local
aaa authentication enable default tacacs+ local
aaa authorization commands 1 default tacacs+ local
aaa authorization commands 15 default tacacs+ local
aaa accounting exec default start-stop tacacs+
aaa accounting commands 1 default start-stop tacacs+
aaa accounting commands 15 default start-stop tacacs+
aaa accounting connection default start-stop tacacs+
aaa accounting system default start-stop tacacs+
Can only routers commands be logged by the acs server, or can switches as well. This is a test environment and would like to figure it out. Also, I have nothing showing up under my TACACS+ administration log but have lots under my TACACS+ accounting log. I have enable the administration log on the acs server and nothing changed.
Thanks,
Solved! Go to Solution.
06-11-2007 12:41 PM
ohh sorry , I see its 4.1.
This is a known issue, you need to apply patch ACS 4.1.1.23.5 to fix the issue.
Patch for appliance is availble on
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des')">http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des;
Patch name : ACS SE 4.1.1.23.5 accumulative patch
Patch for acs windows is availble on
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des')">http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des;
Patch Name : ACS 4.1.1.23.5 accumulative patch
That should fix the issue,
Regards,
Jagdeep
Note: If that answers your question, then please mark this thread as resolved, so that others can benefit from it.
06-11-2007 12:45 PM
Here is the link,
Patch for appliance is availble on
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des
Patch name : ACS SE 4.1.1.23.5 accumulative patch
Patch for acs windows is availble on
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des
Patch Name : ACS 4.1.1.23.5 accumulative patch
06-11-2007 12:39 PM
Craig,
What is the software ver for acs ?
Thanks,
Jagdeep
06-11-2007 12:41 PM
ohh sorry , I see its 4.1.
This is a known issue, you need to apply patch ACS 4.1.1.23.5 to fix the issue.
Patch for appliance is availble on
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des')">http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des;
Patch name : ACS SE 4.1.1.23.5 accumulative patch
Patch for acs windows is availble on
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des')">http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des;
Patch Name : ACS 4.1.1.23.5 accumulative patch
That should fix the issue,
Regards,
Jagdeep
Note: If that answers your question, then please mark this thread as resolved, so that others can benefit from it.
06-11-2007 12:45 PM
Here is the link,
Patch for appliance is availble on
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des
Patch name : ACS SE 4.1.1.23.5 accumulative patch
Patch for acs windows is availble on
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des
Patch Name : ACS 4.1.1.23.5 accumulative patch
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide