Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

ACS 4.1 and accounting

Hi,

I'm trying to get my acs server to log all the commands that are used during the users session on a network device. I have everything up and running but it won't log the commands at all. Here is my config for AAA from my 2950 switch.

aaa new-model

aaa authentication login default tacacs+ local

aaa authentication enable default tacacs+ local

aaa authorization commands 1 default tacacs+ local

aaa authorization commands 15 default tacacs+ local

aaa accounting exec default start-stop tacacs+

aaa accounting commands 1 default start-stop tacacs+

aaa accounting commands 15 default start-stop tacacs+

aaa accounting connection default start-stop tacacs+

aaa accounting system default start-stop tacacs+

Can only routers commands be logged by the acs server, or can switches as well. This is a test environment and would like to figure it out. Also, I have nothing showing up under my TACACS+ administration log but have lots under my TACACS+ accounting log. I have enable the administration log on the acs server and nothing changed.

Thanks,

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: ACS 4.1 and accounting

ohh sorry , I see its 4.1.

This is a known issue, you need to apply patch ACS 4.1.1.23.5 to fix the issue.

Patch for appliance is availble on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des')">http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des;

Patch name : ACS SE 4.1.1.23.5 accumulative patch

Patch for acs windows is availble on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des')">http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des;

Patch Name : ACS 4.1.1.23.5 accumulative patch

That should fix the issue,

Regards,

Jagdeep

Note: If that answers your question, then please mark this thread as resolved, so that others can benefit from it.

Re: ACS 4.1 and accounting

Here is the link,

Patch for appliance is availble on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des

Patch name : ACS SE 4.1.1.23.5 accumulative patch

Patch for acs windows is availble on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des

Patch Name : ACS 4.1.1.23.5 accumulative patch

3 REPLIES

Re: ACS 4.1 and accounting

Craig,

What is the software ver for acs ?

Thanks,

Jagdeep

Re: ACS 4.1 and accounting

ohh sorry , I see its 4.1.

This is a known issue, you need to apply patch ACS 4.1.1.23.5 to fix the issue.

Patch for appliance is availble on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des')">http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des;

Patch name : ACS SE 4.1.1.23.5 accumulative patch

Patch for acs windows is availble on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des')">http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des;

Patch Name : ACS 4.1.1.23.5 accumulative patch

That should fix the issue,

Regards,

Jagdeep

Note: If that answers your question, then please mark this thread as resolved, so that others can benefit from it.

Re: ACS 4.1 and accounting

Here is the link,

Patch for appliance is availble on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des

Patch name : ACS SE 4.1.1.23.5 accumulative patch

Patch for acs windows is availble on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des

Patch Name : ACS 4.1.1.23.5 accumulative patch

155
Views
5
Helpful
3
Replies
CreatePlease to create content