Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adding HWIC 1FE to Cisco 2811

I just added a new hwic to our router, to allow the addition of a DMZ, and when I booted the router back up the new interface does not show up. All of the lights are green on the back of the new ethernet port I added, but there is nothing in the config. I even tried switching the card to a different hwic slot.

Is there a command I am missing to do a hardware refresh or somtehing? I thought it would auto detect...

Thanks,

Will.

4 REPLIES

Re: Adding HWIC 1FE to Cisco 2811

Hi Will

Can you confirm what level of IOS you are running. HWIC-1FE and HWIC-2FE the minimum level is Cisco IOS 12.4(11) XJ

Regards

Martin

New Member

Re: Adding HWIC 1FE to Cisco 2811

I found another thread which seemed to describe my exact problem, so I understand my IOS verion will need to be updated. You would think after paying $1000 for a card, you would be able to get the ios for free. My IOS Version is 12.4(3a). Any idea how I can get the new ios? I've never had to get one before.

Thanks,

Will...

Re: Adding HWIC 1FE to Cisco 2811

If you have an active service contract you are entitled to IOS updates (within your current featureset) for free.

New Member

Re: Adding HWIC 1FE to Cisco 2811

.

474
Views
0
Helpful
4
Replies