Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA 5505 - Can it be configured for Outbound Load Balancing

Can you configure the ASA 5505 for Load Balancing Outbound traffic. I have 2 T1 connections and would like the 5505 to distribute outbound traffic between the 2 connections.

  • Getting Started with LANs
3 REPLIES

Re: ASA 5505 - Can it be configured for Outbound Load Balancing

You should have your router that is terminating the T1's do the load balancing. You can configure GLBP to load balance on the ethernet side.

Hope that helps.

New Member

Re: ASA 5505 - Can it be configured for Outbound Load Balancing

If you have a router on each t1, you can use ospf to load balance on the way out. Now, load balancing on the way in..... I believe that is taken care of by your ISP.

Re: ASA 5505 - Can it be configured for Outbound Load Balancing

Hi,

Yes you need a router.

You can create MLPPP on the router with one of the ethenet port connected to the cisco asa as outside interface.

531
Views
0
Helpful
3
Replies
This widget could not be displayed.