Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ASA5505 Programming - issue with outside

Hi Gurus,

I'm having a HELL of a time getting a new ASA 5505 online.

in the test environment I can ping my internal gateway, but I can't ping the external IP or the external next-hop gateway IP.

Not sure where I went wrong. Can someone clue me in? Run Config is attached.

caught this on a reload too:

..WARNING: static redireting all traffics at outside interface;

WARNING: all services terminating at outside interface are disabled.

*** Output from config line 105, "static (inside,outside) ..."

my outside IP is masked. Thanks.

1 REPLY

Re: ASA5505 Programming - issue with outside

I see a couple of things missing in your configuration. Can you make the necessary changes and try.

1. Access list entry to permit icmp echo replies on the outside interface.

"access-list outside_access_in extended permit icmp echo-reply"

2. A default route on the PIX to forward all traffic to the external gateway on the outside.

"route outside 0.0.0.0 0.0.0.0 "

HTH

Sundar

310
Views
0
Helpful
1
Replies
CreatePlease to create content