Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Banner Alignment Problem

Hi when using aaa authentication on my 3560 switches the banners remove all the blank space i put in and left align everything. without aaa auth it works ok. any ideas

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Banner Alignment Problem

If you are using the new 12.2(50)SE or 12.2(50)SE1 IOS then it's a known bug. Downgrade to the 12.2(46) if you don't need the extra features of the new release.

Hope this helps. Please rate when applicable.

3 REPLIES
Hall of Fame Super Gold

Re: Banner Alignment Problem

If you are using the new 12.2(50)SE or 12.2(50)SE1 IOS then it's a known bug. Downgrade to the 12.2(46) if you don't need the extra features of the new release.

Hope this helps. Please rate when applicable.

New Member

Re: Banner Alignment Problem

yes we are on 12.2(50)SE as we need the features, thanks i'll wait then until bug is fixed in later ios release

Hall of Fame Super Gold

Re: Banner Alignment Problem

Thanks for the rating.

212
Views
10
Helpful
3
Replies