Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

 
Labels

Forum Posts

Hi all I know that upgrade a relase in ISSU mode on WS-C6807-XL-6T device is not advisable.Anyway, My question is: if the upgrade is done inside the same release train could we have problem ? for example:from 15.5(1)SY8 to 15.5.1-SY12orfrom 15.5(1)SY...

marzi by Level 1
  • 66 Views
  • 1 replies
  • 0 Helpful votes

Hello,I have subnet like this :My pc under vlan 100 (192.168.100.0/24)My NAS under vlan 150 (192.168.150.0/24)Actually when the nas and pc located under same subnet, I can discovery the nas from my laptop using vendor utility, but can't discover when...

hs08 by Spotlight
  • 118 Views
  • 4 replies
  • 0 Helpful votes

Hello, everyone. Our compnay is going to upgrade C9200 software. Can we directly upgrade C9200-48P from 17.03.03 to 17.09.04? 您好,最近相对公司的 C9200 交换机进行软件升级,目前交换机的软件版本是 17.03.03,可以直接升级到最新版本 17.09.04 吗?有没有需要注意的地方?  

Bourne by Level 1
  • 85 Views
  • 2 replies
  • 0 Helpful votes

Hello, I was trying to construct a simple network and got it up the specifications, however when the last step was to configure ipv4 static routes I couldn't quite get it to connect and ping end to end. I tried multiple things but nothing seemed to w...

Hello there.I am trying to upgrade my Switches in installmode to a higher version but it fails, because of invalid image. Switches to upgrade:1x WS-C3850-48P // 2x WS-C3650-48PD IOS in use:16.12.10 CAT3K_CAA-UNIVERSALK9IOS to upgrade to:16.12.10a CAT...

Dynamyte by Level 1
  • 318 Views
  • 10 replies
  • 0 Helpful votes

I have a less then a dozen Cisco 3850 switches that I am working on.  I need to configure 802.1x authentication.  The issue is the switches are reaching out to Cisco ACS and I need to set up radius server to enable 802.1x.  The Cisco ACS I found out ...

John N by Level 1
  • 102 Views
  • 2 replies
  • 0 Helpful votes