C2950 and the command ip dhcp-server and ip helper-address x.x.x.x
I have external site that are connected via C2950 to my Core. On those site I have DHCP server that I want to remove. Can I use layer 2 switch to forward ip address? (I tough that NO, but after reading some post I'm not sure anymore!!!)
the only command available are like the one posted below. Can someone help me out.
Do I need to upgrade the ios to see the ip helper-address.
I'm running version:
Use the ip dhcp-server if you are setting up the switch to be used as a DHCP server.
On the VLAN interface, use "ip helper-address x.x.x.x" with the IP of the DHCP server.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...