Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

C4507R w/ 2* Sup IV redundancy failure and High CPU Util.

CPU Utilization is around 80% and redundancy state is wrong.

But Active Sup-IV is still normal.

Help me.

I attached a reference text.

1 REPLY

Re: C4507R w/ 2* Sup IV redundancy failure and High CPU Util.

Hi

did u try pulling out and re-inserting the SUP card back on the slot ?

the logs tells that active sup was in slot 2 earlier which is down and non operational.

Coz of the same the sup in slot 1 has become active sup now.

i would suggest to take out the sup card and re-insert the same again or try in someother slot (may be in 3rd slot)if u have some free slots available over there in your chasiss.

regds

130
Views
0
Helpful
1
Replies