I'm trying to set up a tiny network between 4 buildings using 828s at each building with a 6015 joining them. I have no need to go anywhere other than between the 828s (no uplink to the rest of our network, or the internet for that matter). All I can get my hands on at this point are the four 828s and the 6015, so I have no ATM uplink... Is this something I can overcome? Suggestions would be GREATLY appreciated! Thanks!
connecting your 828 routers with the 6015 would be possible if your 6015 has the 8xG.SHDSL line card. You would then connect your 828 routers to the 6015, and be the ISP for your 4-building network, so to speak. Do you know the configuration details for the 6015 ?
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...