hello
there is a 6509 with SUP720 which needs to be upgrade and i'd have some questions.
here is the output of show module:
------------------ show module ------------------
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP xxxxxxxxxxx
2 48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX xxxxxxxxxxx
3 48 48-port 10/100 mb RJ45 WS-X6148-RJ-45 xxxxxxxxxxx
4 48 48-port 10/100 mb RJ45 WS-X6148-RJ-45 xxxxxxxxxxx
5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE xxxxxxxxxxx
6 48 48-port 10/100 mb RJ45 WS-X6148-RJ-45 xxxxxxxxxxx
7 3 Network Analysis Module WS-SVC-NAM-1 xxxxxxxxxxx
Currently 12.2(18)SXD7 runs on it. filename:s72033-jk9sv-mz.122-18.SXD7b.bin
this need to be change as this image is already 1,5 year old.
checking software download section on cco i can see that 12.2.33-SXI(ED) is the latest release.
my question is what is the different between SXD, SXI, SXH, SHI.? is it just an indicator of increase or has any other meaning?
i need the same feature set that s72033-jk9sv-mz.122-18.SXD7b.bin provides but can't really decide to which IOS version i should upgrade.
is the s72033-adventerprisek9_wan-vz.122-33.SXI.bin would be the right choice?
secondly as it can be seen above there is a NAM-1 modul installed in this switch with 3.3(1) running on it.
can i directly upgrade it to 4.0 or first i have to go with 3.6 and then 4.0?
thanks