Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cat 6513 Supervisor Module Placement

Does Cisco recommend a specific slot (or slots) for the placement of the supervisor modules in a 6513 Chassis?

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Cat 6513 Supervisor Module Placement

Hi

See "Slot requirements" in Table 2 in this document:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet0900aecd801c5cab.html

It includes every chassis and supervisor models

HTH

3 REPLIES

Re: Cat 6513 Supervisor Module Placement

hi

AFAIK this is the slot sepcs for the SUP module placement in 6500/7600..

• 6-slot chassis: slots 5 and 6

• 9-slot chassis: slots 5 and 6

• 13-slot chassis: slots 7 and 8

regds

New Member

Re: Cat 6513 Supervisor Module Placement

Thanks for the response, any idea where I could find an article that shows this?

I've tried a few searches and so far... Nothing.

Silver

Re: Cat 6513 Supervisor Module Placement

Hi

See "Slot requirements" in Table 2 in this document:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet0900aecd801c5cab.html

It includes every chassis and supervisor models

HTH

1130
Views
0
Helpful
3
Replies