catalyst 4006 chassis with CATALYST 4500 SUPERVISOR V

[whoknowswhat86]

Hi Experts,

Can I use CATALYST 4500 SUPERVISOR V(WS-X4516) in an old 6-slot catalyst 4006 chassis( WS-C4006). I want to run the latest IOS available and I have the following line cards:

WS-X4232-RJ-XX

WS-X4418-GB

WS-X4148-RJ

thanks and regards

alex

[Jon Marshall]

Hi Alex

Yes you can run the Sup V in the 4006 chassis. See this link

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html#wp1015031

The Sup V also supports the WS-X4418-GB and WS-X4148-RJ modules - see attached link

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/product_data_sheet09186a00801fcaba_ps2797_Products_Data_Sheet.html

HTH

Jon