Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Catalyst 4510R-E and Line Card Options

I am considering purchasing the following 4510R-E switch items for installation in a new building that will go online shortly.

a) 1 x 4510R-E Chassis (WS-C4510R-E)

b) 1 x Supervisor Engine 6-E (WS-X45-Sup6E)

c) 1 x 24-Port 10/100/1000 Module (WS-X4424-GB-RJ45)

d) 6 x 48-Port PoE 803.3af 10/100 (WS-X4248-RJ45V)

We are purchasing classic line cards for item c and d initially due to budget restrictions.

Three questions:

1) What power supply should I purchase to power this configuration?

2) The 4510 will connect to two Catalyst Blade 3020 switch, each using 4gig etherchannels. Can we do this connecting to item c or do we need an additional card (the only other things attached to item c are probably a Windows storage server and domain controller)

3) Does this sound like it will give us good performance or have I missed anything?

Many thanks for any advice

Mark

1 REPLY

Re: Catalyst 4510R-E and Line Card Options

1:) Do you plan to use PoE with your line cards? Make sure you plan accordingly. I would recommend using the power calculator for this.

2:)This can be done no problem. No additional equipment required.

3:) You should be fine performance wise. This is a pretty standard setup.

Cisco Power Calculator

http://tools.cisco.com/cpc/launch.jsp

HTH,

Mark

480
Views
0
Helpful
1
Replies