We are currently using a 2WIRE879 BT modem as our gateway and Internet modem. Due to the redesigning of our internal network for expansion, security and robustness, we are replacing the BT modem with a Cisco 2811 ISR which has the following HWICs:
The Internet Connection Details (which keeps changing though), on the BT modem is shown below:
Internet Connection Details
PVC Info: 0/38
Connection Type: PPPoA
Internet Address: 18.104.22.168
Subnet Mask: 255.255.255.252
Default Gateway: 22.214.171.124
Primary Domain Name Server: 126.96.36.199
Secondary Domain Name Server: 188.8.131.52
Please my first question is:
What information exactly do I need from BT to successfuly configure my ADSL on the Cisco 2811 ISR router
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...