Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco 831 doing pppoe auth

Got a cisco 831 and I need to know if this router is capable of doing the pppoe auth without having the ATM interface.

Currently my dsl modem is in bridge mode with a wrt54g doing the pppoe login/auth.

TIA

3 REPLIES

Re: cisco 831 doing pppoe auth

Sure, I do it with a 851. You need to use a dialer interface though.

HTH and please rate.

New Member

Re: cisco 831 doing pppoe auth

Thanks, Should my config look something like this:

vpdn enable

no vpdn logging

!

vpdn-group pppoe

request-dialin

protocol pppoe

!

interface Dialer 1

description connected to Internet

ip address negotiated

ip mtu 1492

encapsulation ppp

dialer-group 2

dialer pool 1

ppp authentication chap pap callin

ppp chap hostname

ppp chap password 12345

ppp pap sent-username password 12345

!

interface Ethernet 1

no shutdown

description connected to Internet

ip address x.x.x.x x.x.x.x

no keepalive

pppoe enable

pppoe-client dial-pool-number 1

!

interface Ethernet 0

no shutdown

description connected to Internal Switch

ip address x.x.x.x x.x.x.x

Re: cisco 831 doing pppoe auth

Mines a little different and that of course depends on your ISP, but it looks pretty good to me.

279
Views
0
Helpful
3
Replies