Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco 851W and VLANS

Hello,

I have a Cisco 851W router and I'm having this configuration:

All LAN ports and dot11Radio are bridged.

So now I'm trying to do this thing:

I'm trying to create a wireless guest net .

So i've created a bridging vlan 1 native that is for my current trusted ssid and another routing vlan an ssid that is for my guest net .

The problem is that when i create vlan 1 it locks me out: i can connect to the wireless but i cant access nothing on the router (FastEthernet 0-4)

Any solutions ? Thanks

3 REPLIES
Silver

Re: Cisco 851W and VLANS

Do you have any ACL(access-list) configured on your router?. Send your router configuration. Looking at that, I can understand the problem better.

Bronze

Re: Cisco 851W and VLANS

Hi,

How are you accessing to manage the router. via console or telnet.

Why u want to use vlan 1 native. by making vlan 1 native your trying to send vlan1 packets untagged across the link.

Try using only vlan 1 withous native command and check if it works.

HTH,

Raj

New Member

Re: Cisco 851W and VLANS

Thanks's for the response . I will try , but now

i've discovered another problem that may cause this one

Here is the link :

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dde0f45

I will attach the running config , but i deleted any encrypted hashs and public ip's

(this is a public forum after all}

265
Views
0
Helpful
3
Replies
CreatePlease to create content