Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 857 not working since ADSL2 upgrade

Hi,

I have a Cisco 857 router. Recently the ISP (BT) have upgraded the ADSL line to ADSL2. Since then, the router is unable to obtain an internet connection. The CD light flashed constantly, and the PPP light never comes on solid.

There have been no changes to the router config. I tried resetting the router to factory defaults, then giving the router a basic config, but I still get the same result.

My ADSL settings:

Enc: PPPoA(AAL5MUX)

VPI: 0

VCI: 38

Address: IP Negatiated

Authentication: Chap & Pap

As a test, I swapped the Cisco 857 for a Netgear 834, and the Netgear connected straight away.

Can anyone suggest anything I can try?

Thanks

Nick

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Cisco 857 not working since ADSL2 upgrade

Hello Nick,

try the following to download an updated firmware

Try:

ftp://ftp.cisco.com/pub/access/800/

What you want is 3-0-33 FW.

Thanks to Paolo Bevilaqua

Hope to help

Giuseppe

16 REPLIES

Re: Cisco 857 not working since ADSL2 upgrade

AFAIK the 857 does not support ADSL 2

HTH>

Re: Cisco 857 not working since ADSL2 upgrade

Nick,

It does support.

http://www.cisco.com/en/US/prod/collateral/routers/ps380/ps6200/prod_qas0900aecd8028a982.html

Q. Do the platforms support ADSL2/2+?

A. The Cisco 857, 876, 877 and 877M routers support ADSL2/2+ standards.

Please let me know which ios version you're using and the output of "debug pppatm error". It's good to see your configuration.

HTH,

Toshi

New Member

Re: Cisco 857 not working since ADSL2 upgrade

Hi,

Thanks for your assistance.

IOS version is 2.4

I entered the command "debug pppatm error", and the message "PPP over ATM errors debugging is on" is displayed. But no debug information was shown. Do I need to enter another command to view the output?

Nick

New Member

Re: Cisco 857 not working since ADSL2 upgrade

My config

Hall of Fame Super Silver

Re: Cisco 857 not working since ADSL2 upgrade

Hello Nick,

post

sh dsl interface atm0

to be noted:

if the provider DSLAM has been upgraded to ADSL2 it can be a problem because ADSL2+ is backward compatible with ADSL but ADSL2 isn't.

Hope to help

Giuseppe

New Member

Re: Cisco 857 not working since ADSL2 upgrade

sh dsl interface atm0 is attached

Hall of Fame Super Silver

Re: Cisco 857 not working since ADSL2 upgrade

Hello Nick,

as I've suspected there is incompatibility.

you probaly need a firmware upgrade to achieve a working link.

the easiest way to do this is to load a newer IOS image like 12.4(20)T or later.

Edit:

if you look in the forum archive you can find the procedure and the link to download newer firmware.

Hope to help

Giuseppe

New Member

Re: Cisco 857 not working since ADSL2 upgrade

Thanks Giuseppe.

Can I download the latest IOS from this website?

Nick

New Member

Re: Cisco 857 not working since ADSL2 upgrade

Thanks. I will check it out and let you know how it goes.

Nick

Re: Cisco 857 not working since ADSL2 upgrade

Nick,

Sorry for replying too late. I got a long weekend. As Giuseppe mentioned, you may try to upgrade your ios. However you need to have CCO to access this software. If you've purchased the service you can request user/password from the vendor.

Toshi

New Member

Re: Cisco 857 not working since ADSL2 upgrade

Hi,

I am struggling to find how to download the software. This is what I have done so far.

http://cisco.com

"Products and Services"

"Cisco IOS and NX-OS Software"

Cisco IOS Software Releases > Cisco IOS Software Release 12.4T

Support > Download Software

Log in

Download Software > Select a product

Routers > Cisco 800 Series > Cisco 857 Integrated Services Router

Select a release

Latest Release > 12.4.15T9(MD)

Select the link to the file at bottom of page

"To download this software, you must do all of the following:

Register

Due to United States export compliance regulations, you must be registered on Cisco.com to download this software. If you do not have a Cisco.com username and password, please register now. Registration is free. If you have already registered, please log in to proceed."

I am already logged in!

If I select Log in now, I am returned to the previous page!

Hall of Fame Super Silver

Re: Cisco 857 not working since ADSL2 upgrade

Hello Nick,

the CCO account has to be associated to a service contract to be able to download the IOS image.

Contact who has sold you the router.

your account has not enough rights at the moment.

Hope to help

Giuseppe

Hall of Fame Super Silver

Re: Cisco 857 not working since ADSL2 upgrade

Hello Nick,

try the following to download an updated firmware

Try:

ftp://ftp.cisco.com/pub/access/800/

What you want is 3-0-33 FW.

Thanks to Paolo Bevilaqua

Hope to help

Giuseppe

New Member

Re: Cisco 857 not working since ADSL2 upgrade

Hi,

Thanks for the link. I downloaded the file adsl_alc_20190.3-0-33.bin

Next I used the command "copy tftp flash" to update the router. I have attached the results - is this correct?

I will test this at the affected office on Monday and post back the results.

Nick

Hall of Fame Super Silver

Re: Cisco 857 not working since ADSL2 upgrade

Hello Nick,

I give you the link to a similar thread in WAN forum

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=WAN%2C%20Routing%20and%20Switching&topicID=.ee71a06&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd29d74

where Andrew explains the file has to be in flash and has to be renamed to the name the router looks for at boot time.

Here are the Andrew's words

You can also independantly load ADSL firmware outside of the IOS image by copying the firmware file to the flash and renaming it to 'adsl_alc_20190.bin'. During the IOS boot the router checks for this file in flash and if it is there loads this instead of the one embedded in the IOS image. The latest firmware for the ADSL modem in the 857/877 is version 4.0.15 and is available here:

http://www.cisco.com/cgi-bin/Software/Tablebuild/doftp.pl?ftpfile=/cisco/access/800/adsl_alc_20190.bin.4.0.15

Hope to help

Giuseppe

New Member

Re: Cisco 857 not working since ADSL2 upgrade

Hi Giuseppe,

I renamed the file to adsl_alc_20190.bin, then copied it to the router, and this has now resolved the issue. Thank you for all your help.

Just out of interest, is there a way to remove this file once it has been copied to the flash?

Nick

1768
Views
0
Helpful
16
Replies
CreatePlease login to create content