Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco ASA 5505 Vlan1 IP change

Hi,

In default mode the ASA 5505 is setup with two Vlan's, one inside and one outside. Vlan1 is the default inside VLan, with IP 192.168.1.1. I would like to change the subnet of Vlan1 tot 192.168.10.1, but when I do, no Ethernet port is assigned to Vlan1 anymore (was 0/1 - 0/7). What I have done is;

#config t

(config)#interface vlan 1

(config)#ip address 192.168.10.1 255.255.255.0

But after that, no Ethernet port is within Vlan1, so I tried the following to assign one (port 0/1);

#config t

(config)#interface 0/1

(config)#switchport access vlan 1

(config)#no shut

But nothing happends when monitoring (#show run) interface 0/1 (no Vlan assigned)

Please help!

Everyone's tags (3)
7 REPLIES

Re: Cisco ASA 5505 Vlan1 IP change

Hi,

Check out the below links for configuratiion in ASA 5505 ,Hope this helps out your query !!

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/int5505.pdf

Regards

Ganesh.H

New Member

Re: Cisco ASA 5505 Vlan1 IP change

Well, I did not solve it....The problem is when the Inside (vlan1) IP has been modified I'm no longer able to connect to the ASA using ASDM. I found on the internet that is has something to do with an DHCP Pool assigned to Vlan1, but Im unable to remove this pool, I guess as a result of leak of knowledge....

Maybe someone can help why changing the default IP of the default Vlan causes this much trouble...Thanks in advance.

New Member

Re: Cisco ASA 5505 Vlan1 IP change

Well, solved it myself!

It's kind a drastic solution, but it worked. To configure an other default IP for Vlan 1, simply restore the ASA to it factory defaults with the following parameters;

Let's say we like to set Vlan1 to subnet 192.168.10.x instead of (the default) 192.168.1.x

(config)#configure factory-default 192.168.10.1 255.255.255.0

Jobs done, happy new year...

New Member

Re: Cisco ASA 5505 Vlan1 IP change

Excellent job stendec75 , I was searching for the same issue. I used ASDM to change my Vlan1 IP, but then, after the change, I lost all access to it through ASDM. By posting your own found solution to your problem, you helped me out a ton.

Thank you.

Re: Cisco ASA 5505 Vlan1 IP change

The reason why u lost ASDM connection is once you change the inside ip you have to allow the same ip for

http server enable

http 192.168.x.x 255.255.255.0 inside

If u do not do this the first ip will only be allowed and with the new ip which u given will not have access.

Sent from Cisco Technical Support iPad App

New Member

simple solution to issue...

simple solution to issue... cheers!! thanks...

New Member

Re: Cisco ASA 5505 Vlan1 IP change

Hi,

There's no other way?

Sent from Cisco Technical Support iPhone App

34170
Views
10
Helpful
7
Replies