Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Cisco Catalyst 500 and NTP

Hi All,

Does anyone know how to change\add a ntp server into the config on a catalyst 500 express switch?

It seems to be going to an internet NTP server by default.

Many Thanks

Andy

2 REPLIES

Re: Cisco Catalyst 500 and NTP

Hi,

From: http://www.cisco.com/application/pdf/en/us/guest/products/ps6545/c2001/ccmigration_09186a0080539179.pdf

The switch clock is automatically synchronized with the

system clock on your network management station. You can manually set the

system clock settings if the switch should have different time settings.

I hope this helps.

Best regards.

Massimiliano.

Silver

Re: Cisco Catalyst 500 and NTP

Task Command

Step 1

Specify the IP address of the NTP server.

set ntp server ip_addr

Step 2

Enable NTP client mode.

set ntp client enable

Step 3

Verify the NTP configuration.

show ntp [noalias]

Regards,

Dharmesh Purohit

791
Views
4
Helpful
2
Replies
CreatePlease to create content