cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
479
Views
8
Helpful
4
Replies

cisco IOS problem

sarenos2006
Level 1
Level 1

I have this error when I start my router

System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Copyright (c) 2003 by cisco Systems, Inc.

Bad RAM at location 0x00000000: wrote 0x00000000, read 0x00000400

Which is the problem? How can I fix it?

4 Replies 4

I suggest you remove all the modules

and check if the device boots.

If the device continues to fail to bootup, replace

the RAM.

Hope that helps

SD

adnan.zafar
Level 1
Level 1

RAM is creating problem or you can say that not compatable just change your RAM ( If 2 RAMS are placed in Router then unplugged ram 1 by 1 like unplug 1st RAM and check then place 1st RAM back and unplug 2nd RAM and then check

i m sure your problem will solve

Hope this will help you

if yes then rate this article

I have changed the RAM and the problem is fixed.

Best regards.

So is my reply helpfull to you if yes then do rate it

thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card