Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CNA and stacked 3750s

Hi,

Just starting a new Cisco core. Using CNA,it sees one 3750 just fine. When I stack that with an identical 3750 (the stacking seems to be successful when I telnet into the master switch), it shows up as an unsupported device in CNA. Anybody help me figure out what's going on? Thanks in advance.

4 REPLIES
Silver

Re: CNA and stacked 3750s

I have seen this issue with switches running 122-25.SEB2 it shows as "unsupported devices" and the fix is to downgrade to 12.1.25SEB4.

Re: CNA and stacked 3750s

This requires further troubleshooting, please open a TAC case

New Member

Re: CNA and stacked 3750s

Thanks. I completely wiped out the second 3750 again, and tried it again and it worked.

New Member

Re: CNA and stacked 3750s

According to cisco whitepaper before that if you add or replace a new 3750 switch to be a memeber of the stack, the master will automatically download it's image to the new member if they don't have the same IOS. In our case, we have to make sure that the new or replacement one has the same image as the master.

152
Views
0
Helpful
4
Replies