My switch is Catalyst 6509. I have 2 ADSL modem-routers that has 1M download speed each. I would like to "combine" both download speed so that I get 2M.
Each ADSL modem-router connects to end PC using LAN cable. Is it possible to connect two LAN cables from the two modemrouters to the switch, and then configure the switch to "combine" the two LAN cables as one (consolidate their speed)? We can then connect one "output" cable to the endstation so that that particular endstation can have 2M download speed.
Is this something to do with load balancing? I need some guidance as to how this can be done.
This is not a supported configuration for etherchannel (combining FE or GigE interface to create a bigger pipe) . Etherchannel must terminate on a single device and that device must also support channeling. I am not 100% certain that multi-link can do this either.
in addition to the other posts, there are routers available with multiple WAN ports, which let you achieve load balancing/sharing, one of them being the Draytek Vigor 300. If you are interested, have a look at this link:
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.