Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Configuration Register Question

hi,

i'm using a C2960 in one of our LAN office. is confreg 0xF ok? i know 0x2102 is the good confreg setup. will this affect the switch boot sequence or if ever restarts and stuck in Rommon?

vimix4#sh ver

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)SEE2, RELE

ASE SOFTWARE (fc1)

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Fri 28-Jul-06 04:33 by yenanh

Image text-base: 0x00003000, data-base: 0x00AA2F34

ROM: Bootstrap program is C2960 boot loader

BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)SEE1, RELEASE SOFTWA

RE (fc1)

vimix4 uptime is 2 weeks, 4 days, 16 hours, 46 minutes

System returned to ROM by power-on

System restarted at 21:10:12 PDT Tue Aug 19 2008

System image file is "flash:c2960-lanbase-mz.122-25.SEE2/c2960-lanbase-mz.122-25

.SEE2.bin"

cisco WS-C2960-48TC-L (PowerPC405) processor (revision B0) with 61440K/4088K byt

es of memory.

Processor board ID FOC1050ZB7P

Last reset from power-on

1 Virtual Ethernet interface

48 FastEthernet interfaces

2 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

64K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 00:1A:A1:56:5F:80

Motherboard assembly number : 73-9835-07

Power supply part number : 341-0097-02

Motherboard serial number : FOC10500UFM

Power supply serial number : DCA1045816B

Model revision number : B0

Motherboard revision number : C0

Model number : WS-C2960-48TC-L

System serial number : FOC1050ZB7P

Top Assembly Part Number : 800-26672-02

Top Assembly Revision Number : C0

Version ID : V02

CLEI Code Number : COM3F00BRA

Hardware Board Revision Number : 0x02

Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 50 WS-C2960-48TC-L 12.2(25)SEE2 C2960-LANBASE-M

Configuration register is 0xF

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Configuration Register Question

John,

The current configuration register is the correct one that you want. Since you need to hold down the mode button to initiate the switch into rommon instead of the configuration register like most routers. 0xF is the default and recommended configuration register for the 2960 switch and is not changeable.

HTH,

Mark

4 REPLIES

Re: Configuration Register Question

deleted

Re: Configuration Register Question

The link you provided is for routers not the lower end switching platform. Though visible in the show version output, the configuration register information is not supported on the switch.

Re: Configuration Register Question

John,

The current configuration register is the correct one that you want. Since you need to hold down the mode button to initiate the switch into rommon instead of the configuration register like most routers. 0xF is the default and recommended configuration register for the 2960 switch and is not changeable.

HTH,

Mark

Re: Configuration Register Question

cool! thnx!

1557
Views
5
Helpful
4
Replies
CreatePlease to create content