Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

configuring Timezone

Hello, im trying to catch the change of time but im a little confused about the role of "daylight saving time". My zone is the UTC/GMT +2 hours and the daylight saving time +1. Does the ios count the sum or only the +2. What the timezone should be? +2 or +3 ?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: configuring Timezone

You first need to enter the command:

clock timezone EET +2

http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_03.html#wp1013950

Followed by the command:

clock summer-time EEST recurring

http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_03.html#wp1013813

You are able to change the start and end date for the summer-time with the above command as well. All this information is explained in the links I've provided.

HTH,

__

Edison.

1 REPLY
Hall of Fame Super Bronze

Re: configuring Timezone

You first need to enter the command:

clock timezone EET +2

http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_03.html#wp1013950

Followed by the command:

clock summer-time EEST recurring

http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_03.html#wp1013813

You are able to change the start and end date for the summer-time with the above command as well. All this information is explained in the links I've provided.

HTH,

__

Edison.

148
Views
0
Helpful
1
Replies
CreatePlease to create content