01-06-2010 07:19 AM - edited 03-06-2019 09:10 AM
I'm connecting to a remote location and need to copy a few files off the flash to a host on the LAN so I can update them. I know to go from the lan to the flash I can use
copy tftp://host/file
but is it possible to do the same thing in reverse?
Solved! Go to Solution.
01-06-2010 08:34 AM
Hi Richard,
To Copy file from flash to tftp
Run this command copy flash tftp
check out the below link for more information
http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a6744.shtml
Hope that helps out your query !!
Regards
Ganesh.H
01-06-2010 07:26 AM
it seems like what I need is;
copy flash:[file] tftp://[host]
01-06-2010 08:34 AM
Hi Richard,
To Copy file from flash to tftp
Run this command copy flash tftp
check out the below link for more information
http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a6744.shtml
Hope that helps out your query !!
Regards
Ganesh.H
01-06-2010 01:19 PM
Hi Richard,
Don't forget to copy the vlan.dat file (if you are using more than the default VLAN 1).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide