Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Copy from flash to host on LAN?

I'm connecting to a remote location and need to copy a few files off the flash to a host on the LAN so I can update them. I know to go from the lan to the flash I can use

copy tftp://host/file

but is it possible to do the same thing in reverse?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Copy from flash to host on LAN?

Hi Richard,

To Copy file from flash to tftp

Run this command copy flash tftp


check out the below link for more information

http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a6744.shtml

Hope that helps out your query !!

Regards
Ganesh.H

3 REPLIES
New Member

Re: Copy from flash to host on LAN?

it seems like what I need is;

copy flash:[file] tftp://[host]

Re: Copy from flash to host on LAN?

Hi Richard,

To Copy file from flash to tftp

Run this command copy flash tftp


check out the below link for more information

http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a6744.shtml

Hope that helps out your query !!

Regards
Ganesh.H

Hall of Fame Super Gold

Re: Copy from flash to host on LAN?

Hi Richard,

Don't forget to copy the vlan.dat file (if you are using more than the default VLAN 1).

463
Views
0
Helpful
3
Replies