Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

corrupted ios

I have an mc3810 and the ios is gone. How do I get an ios in the flash?

4 REPLIES
New Member

Re: corrupted ios

hello

if the router is in rommon where reloade, you can load ios via xmodem

you can find the procedure here:

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bfac.shtml#proc_3600

HTH, Please rate if this help

regards,

cisand

New Member

Re: corrupted ios

Thanks, but the ver of system bootstrap I have does'nt support Xmodem

8126976 bytes available (1024 bytes used)

rommon 2 >

rommon 2 >

System Bootstrap, Version 11.3(1)MA1, MAINTENANCE INTERIM SOFTWARE

Copyright (c) 1998 by cisco Systems, Inc.

Compiled Sat 24-Jan-98 14:55 by krunyan

PPC860 PowerQUICC, partnum 0x0000, version A03(0x0013)

MC3810 platform with 32768 Kbytes of main memory

boot: cannot determine first runnable file name on device "eprom:"

MC3810 CPU restarted, RSR=E8000000, reason(s):,

loss of PLL,

checkstop reset

System Bootstrap, Version 11.3(1)MA1, MAINTENANCE INTERIM SOFTWARE

Copyright (c) 1998 by cisco Systems, Inc.

Compiled Sat 24-Jan-98 14:55 by krunyan

PPC860 PowerQUICC, partnum 0x0000, version A03(0x0013)

MC3810 platform with 32768 Kbytes of main memory

rommon 1 >

rommon 1 > dir flash:

Initialize Flash file system.....

total size = 8388608

Initializing Flash...

flashfs[0]: 0 files, 1 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 8128000

flashfs[0]: Bytes used: 1024

flashfs[0]: Bytes available: 8126976

flashfs[0]: flashfs fsck took 1 seconds.

...done Initializing Flash.

Flash SIMM Init OK

Directory of flash:/

8126976 bytes available (1024 bytes used)

rommon 2 >

Re: corrupted ios

On a MC3810 you have to use the boot helper image to load the IOS using TFTP.

Procedure is listed here. Look under the heading Installing a Cisco IOS Image in Flash Memory.

http://www.cisco.com/en/US/products/hw/routers/ps1904/prod_module_installation_guide09186a00800eac5e.html#xtocid2132620

HTH,

Sundar

*Please rate all helpful posts.

New Member

Re: corrupted ios

I tried the boot but this error message came up..

rommon 1 > boot

boot: cannot determine first runnable file name on device "eprom:"

rommon 2 >

128
Views
0
Helpful
4
Replies