Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DRAM slot usage on 1760 Voice router

I have a 1760 router with 96MB DRAM. Is there a way I can find out, without opening the router up, (1) how many slots there are for installing DRAM; and (2) which of the slots are occupied with DRAM and which are free?

  • Getting Started with LANs
1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: DRAM slot usage on 1760 Voice router

I think with 1760, only one DIMM slot is available and in ur router, it is fixed with 64 MB RAM.This router already has 32MB on board by default; plus the 64Mb DIMM; total 96Mb.SO, to upgrade u may have to remove that 64MB and replae it with the memory size u want. But as of now, there is not any command that will tell you which banks or slota are filled for dram. They are looking into implamenting this in future ios's. But as of now there is no command.

1 REPLY
Silver

Re: DRAM slot usage on 1760 Voice router

I think with 1760, only one DIMM slot is available and in ur router, it is fixed with 64 MB RAM.This router already has 32MB on board by default; plus the 64Mb DIMM; total 96Mb.SO, to upgrade u may have to remove that 64MB and replae it with the memory size u want. But as of now, there is not any command that will tell you which banks or slota are filled for dram. They are looking into implamenting this in future ios's. But as of now there is no command.

120
Views
0
Helpful
1
Replies
This widget could not be displayed.