As requested by Satish, please post
1) Configuration details
2) routing tables
3) An explanation of which statics work and which don't.
Are you redistributing statics into EIGRP ?
i have EDS Switch which have static route 184.108.40.206 which is not advertised to Access Switch thats why i have to write a Static route, i dont know why only this route is not shown in Access Switch my routing table but have others.although i have it in my EDS Routing Table
attached is the configuration of both the 3750 Switches.
Could you clarify. Are any of the static routes on EDS switch showing up in access switch routing table ?
You are not redistributing static routes into EIGRP on EDS switch so it wouldn't get to the access switch.
Apologies if i have misunderstood what you are asking.
yes if you see the routing table of access Switch you can find routes to 172.16.0.0 and other static routes in EDS switch
ip route 10.0.0.0 255.240.0.0 10.4.0.13
ip route 10.16.0.0 255.240.0.0 10.4.0.13
ip route 220.127.116.11 255.255.255.0 10.4.0.13
ip route 18.104.22.168 255.255.255.0 10.4.0.13
ip route 22.214.171.124 255.255.0.0 10.4.0.13
ip route 172.16.0.0 255.254.0.0 10.4.0.13
ip route 172.18.0.0 255.254.0.0 10.4.0.13
ip route 192.168.0.0 255.255.255.0 10.4.0.13
The reason why the static routes are not being advertised into EIGRP - is because you have not configured EIGRP to advertise static routes.
Under your EIGRP configuration
router eigrp 1
Note that you can use a route-map with the redistribuet static if you only want to advertise some of your statics.
Thanks for the reply. Can you please give me a link on where I can study it more deeply? I am not sure If programming statement can also be applied to Network configs like for example:
If this packet came from this destination
then perform this operation.
These docs might be helpful:
Route-Maps for IP Routing Protocol Redistribution Configuration
EIGRP Support for Route Map Filtering