Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Ethernet Link - Problem

Hi All,

I have two ethernet links connected on a single router.I am using PBR(source based) on my router.

issue:- ethernet interface line protocol is not going down on my router even if the service provider media down.Reason-Its a ethernet link.

Give me some tips - Any failure on the service provider media, my router should understand and work with my policy.

Configuration attached.

2 REPLIES
Hall of Fame Super Silver

Re: Ethernet Link - Problem

Hello Gobinath,

you need to combine PBR with object tracking to verify effective next-hop reachability (an automated ping test that tells you when the link is not working anymore)

see

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtpbrtrk.html

Hope to help

Giuseppe

New Member

Re: Ethernet Link - Problem

Hi Giuseppe,

Thanks a lot. I tried this in my test bench and it is working fine.This week end I will apply on my production router.

Thanks!!!!

118
Views
0
Helpful
2
Replies
CreatePlease to create content