Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Example config DHCP over subinterface

Dear All,

I need some help. In my network we separate network / department.

Example

vlan 1 Finance

vlan 2 Technical

vlan 3 Sell

Now We would like to implement DHCP as Centralize Server.

DHCP Server has only 1 interface locate in vlan 1

How can we config in router 3660 to let other vlan receive "Assign IP" from DHCP server in Vlan1

Here is Example configuration in router

interface FastEthernet1/0.1

encapsulation dot1Q 1 native

ip address 10.15.12.254 255.255.255.0

no ip redirects

no ip proxy-arp

ip directed-broadcast

no cdp enable

!

interface FastEthernet1/0.2

encapsulation dot1Q 2

ip address 192.168.90.1 255.255.255.0

no ip redirects

no ip proxy-arp

ip directed-broadcast

!

interface FastEthernet1/0.3

encapsulation dot1Q 3

ip address 172.17.0.254 255.255.255.0

ip directed-broadcast

no ip redirects

no ip proxy-arp

no cdp enable

!

2 REPLIES
Cisco Employee

Re: Example config DHCP over subinterface

Hi Sirapat,

Under Interface fa1/0.2 and interface fa1/0.3 add one command "ip helper-address "

This will redirect your DHCP traffic from other vlans as unicast to vlan 1.

HTH

Ankur

*Pls rate all helpfull post

Hall of Fame Super Silver

Re: Example config DHCP over subinterface

Sirapat

I believe that Ankur has given the correct command to get each of the subinterfaces to forward DHCP requests to the DHCP server. I would add that you need to verify that the DHCP server has a separate scope configured for each of the subnets on each of the subinterfaces.

HTH

Rick

6160
Views
17
Helpful
2
Replies
CreatePlease to create content