Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

First timer

Hi

I usally find find solutions to my problems on cisco.com but alas i can't find a fix for this one

i have a sup-7203bxl showing this error on startup

- RELIABILITY DRIVER: wrong signature on NVFLASH

any ideas what this means

thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: First timer

Try using the SXF series of image. I've been told that will fix it.

-brad

www.ccbootcamp.com

(please rate the post if this helps!)

4 REPLIES

Re: First timer

I can take some guesses:

Bad IOS on flash

Bad NVRAM (config is corrupted)

Bad flash CF

Bad DRAM on sup engine

Bad sup engine

Start from the top down. Try it in this order and see if one of the following fixes it:

1) Reformat the flash, and re-up a good IOS image.

2) Erase your config. reload. re-paste the config after reload

3) Replace the CF card

4) Try different DRAM

5) CALL TAC

-brad

www.ccbootcamp.com

(please rate the post if this helps!)

New Member

Re: First timer

Can you paste a sh ver for that sup/image?

Re: First timer

Try using the SXF series of image. I've been told that will fix it.

-brad

www.ccbootcamp.com

(please rate the post if this helps!)

New Member

Re: First timer

Hi, did you ever get this resolved? I have a 6509-E that I get the same message on at reload time. Cisco had me replace the SUP720 but that didn't fix it. I also removed the compact flash card and did a reload. Still got the message.

245
Views
5
Helpful
4
Replies
CreatePlease to create content