Building on a previous post regarding managed vs. unmanaged, what does it mean when a switch has a fixed configuration, like the 2950? Do I have to use the web-based management interface and set up a cluster, or can I just treat it like any other L2 switch and use the CLI? Also, with the 2950, how can I separate the mgmt vlan from the the data vlan? Do I just make the second vlan and give the SVI to that vlan instead of vlan1?
3. You can use any vlan (id) for management vlan and do not assign any users to that vlan. Yes, create an SVI for the management vlan on the layer 2 switches. You probably know that layer 2 switches can only have one active SVI and that's solely used for management traffic only.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...