Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

'flash:c2600-js-mz.122-34.bin' is too large for available memory??

guyz, i have upgrade my 2621 IOS,the IOS requirement is 16/48 and my router is have 16/48 as well. But everytime the router boot, ther is an error msg. What does it means?

"%SYS-3-IMAGE_TOO_BIG: 'flash:c2600-js-mz.122-34.bin' is too large for available memory (7016856 bytes).boot of "c2600-js-mz.122-34.bin" using boot helper "flash:c2600-js-mz.122-34.bin" failed

error returned: File read failed -- Not enough space

loadprog: error - on file open

boot: cannot load "c2600-js-mz.122-34.bin"

++++ BOOT MSG HERE ++++

program load complete, entry point: 0x80008000, size: 0xb8d40c

Self decompressing the image : ################################################################################################################################################################################################################################ [OK]

Smart Init is enabled

smart init is sizing iomem

ID MEMORY_REQ TYPE

0000A2 0X0010A400 C2600 Dual Fast Ethernet

0X000F3BB0 public buffer pools

0X00211000 public particle pools

TOTAL: 0X0040EFB0

If any of the above Memory Requirements are

"UNKNOWN", you may be using an unsupported

configuration or there is a software problem and

system operation may be compromised.

Rounded IOMEM up to: 5Mb.

Using 10 percent iomem. [5Mb/48Mb]

%SYS-3-IMAGE_TOO_BIG: 'flash:c2600-js-mz.122-34.bin' is too large for available memory (7016856 bytes).boot of "c2600-js-mz.122-34.bin" using boot helper "flash:c2600-js-mz.122-34.bin" failed

error returned: File read failed -- Not enough space

loadprog: error - on file open

boot: cannot load "c2600-js-mz.122-34.bin"

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

C2600 platform with 49152 Kbytes of main memory

program load complete, entry point: 0x80008000, size: 0xb8d40c

Self decompressing the image : ################################################################################################################################################################################################################################ [OK]

Smart Init is enabled

smart init is sizing iomem

ID MEMORY_REQ TYPE

0000A2 0X0010A400 C2600 Dual Fast Ethernet

0X000F3BB0 public buffer pools

0X00211000 public particle pools

TOTAL: 0X0040EFB0

If any of the above Memory Requirements are

"UNKNOWN", you may be using an unsupported

configuration or there is a software problem and

system operation may be compromised.

Rounded IOMEM up to: 5Mb.

Using 10 percent iomem. [5Mb/48Mb]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

+++++++++++++++++

3 REPLIES
New Member

Re: 'flash:c2600-js-mz.122-34.bin' is too large for available me

++++ Show Version ++++

Router#sh version

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(34), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2006 by cisco Systems, Inc.

Compiled Wed 01-Mar-06 20:31 by pwade

Image text-base: 0x8000808C, data-base: 0x814718E4

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Router uptime is 7 minutes

System returned to ROM by reload

System image file is "flash:c2600-js-mz.122-34.bin"

cisco 2621 (MPC860) processor (revision 0x102) with 44032K/5120K bytes of memory.

Processor board ID JAD04290DBX (302381003)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

2 FastEthernet/IEEE 802.3 interface(s)

2 Serial(sync/async) network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

+++++++++++++++++++++++++++++++++++++++++++

Re: 'flash:c2600-js-mz.122-34.bin' is too large for available me

Hi there: Please be aware that recommended resources for an IOS image are only MINIMUM and hence you might still upgrade your router's memory

1. %SYS-3-IMAGE_TOO_BIG: '[chars]' is too large for available memory ([dec] bytes).

The allocated memory for the image is too small to hold the image file.

Recommended Action: Increase the amount of memory available in the router by booting with a smaller image, disabling nonessential subsystems, or upgrading the installed memory. Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information.

Hope it helps ... please rate it if it does !!!

New Member

Re: 'flash:c2600-js-mz.122-34.bin' is too large for available me

whats the output of a show flash?

Any other files in your flash?

copy your flash to a tftp server then try removing the files and see if your new IOS fits?

If not, just downgrade a bit and find a smaller IOS

rate if helps!

1191
Views
0
Helpful
3
Replies