Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Flushes

Why flushes on interface:

Last clearing of "show interface" counters 00:32:01

Input queue: 61/256/0/11105 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: random early detection(RED)

5 minute input rate 967000 bits/sec, 490 packets/sec

5 minute output rate 693000 bits/sec, 465 packets/sec

910748 packets input, 229996868 bytes

Received 11217 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 watchdog

0 input packets with dribble condition detected

886455 packets output, 171380224

bytes, 0 underruns

0 output errors, 0 collisions, 1 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out"

input rate 967000 bits/sec, 490 packets/sec - not so big

AS5300 used for voice and dial-up

ios 12.3

4 PRI

1 REPLY

Re: Flushes

Hi there,

From what I understand, a flush is when a packet is market for random discard. This is to do with the queuing settings on the box to ensure that it doesn't get too busy - normal operation.

Regards,

LH

Please rate all posts

139
Views
0
Helpful
1
Replies
CreatePlease to create content