Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Frame Realy setup in a back-to-back setup

I have setup a lab with 2 routers with T1 WICs. I was wondering if I could configure the T1s with freme-relay, would that work? I have tried them with PPP and that worked fine.

Thanks in advance,

3 REPLIES

Re: Frame Realy setup in a back-to-back setup

Hall of Fame Super Silver

Re: Frame Realy setup in a back-to-back setup

Sadik

Sundar is quite correct that you can configure 2 routers with back to back serial connection to use frame relay encapsulation. Be aware that without a device acting as a frame relay switch that it will not act entirely as real frame relay does. For example there will be no LMI in a back to back frame relay configuration. There is also no processing for DE frames or for FECN or BECN.

HTH

Rick

New Member

Re: Frame Realy setup in a back-to-back setup

Thaks to both of you. That helped!

sK

115
Views
0
Helpful
3
Replies