Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

General Question from forum

where will i get a general understanding on how to make two net/subnets that communicate together which reside on the same router 2811.

2 REPLIES

Re: General Question from forum

hi,

Anything regarding 2800 series integrated service routers you can find it out here:

http://www.cisco.com/en/US/products/ps5854/tsd_products_support_series_home.html

HTH,

regards,

shri :)

Silver

Re: General Question from forum

conf t

interface fast 0/0

ip address 192.168.1.1 255.255.255.0

no shut

exit

interface fast 0/1

ip address 192.168.2.1 255.255.255.0

no shut

exit

then connect a PC to fast 0/0 (if directly use cross cable) and give it the IP 192.168.1.2 255.255.255.0 gateway: 192.168.1.1

then connect a PC to fast 0/1 (if directly use cross cable) and give it the IP 192.168.2.2 255.255.255.0 gateway: 192.168.2.1.

both computer should be able to ping each other

124
Views
0
Helpful
2
Replies