cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
729
Views
0
Helpful
3
Replies

Having problem pinging from Switch to Router and between different VLANs

makhan007
Level 1
Level 1
3 Replies 3

Seb Rupik
VIP Alumni
VIP Alumni

Hi Asif,

Can you provide the following output:

On the router:

sh cdp neigh

sh int trunk

sh ip int br

sh int status | inc conn

Assuming the switch config is identical apart from the VLAN99 SVI's, from SW1:

sh int trunk

sh ip int br

cheers,

Seb.

cadet alain
VIP Alumni
VIP Alumni

Hi,

you should configure f0/1 on sw1 as a trunk with switchport mode trunk

PC1 on sw3 has incorrect gateway it should be 192.168.4.254

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

makhan007
Level 1
Level 1

Hello Cadet and all thank you for your reply.

I fixed this problem last night after I posted this question.

I was considering fa0/1 from SW4 to router as not a trunk connection but as soon as I configured it as switcportmode trunk it worked.

But still thank you for your replies and help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco